Encylopedia PS41-380 for all you need to know

[Mecha-wombat]

Stabiliser bar bushes

https://www.aussiemagna.com/forums/sh...5&postcount=22

[Mecha-wombat]

380 Adjustable rear sway bar

https://www.aussiemagna.com/forums/sh...ad.php?t=70796

[Mecha-wombat]

Remove Spanner Icon from Trip computer

https://www.aussiemagna.com/forums/sh...10&postcount=3

[Mecha-wombat]

DIY Muffler install

https://www.aussiemagna.com/forums/sh...ad.php?t=71317

[Flava]

Thread is sticky, we'll see how it goes.

[380matey]

Key disassembly and remote reprogramming.
https://www.aussiemagna.com/forums/sh...=1#post1133663

[380matey]

Cleaning air flow sensor
https://www.aussiemagna.com/forums/sh...=69858&page=24

[Mecha-wombat]

DIY Trans Cooler install


https://www.aussiemagna.com/forums/sh...ad.php?t=74298

[Grubco]

What about upgrading the head lights? Apart from removing the head light assemblies, the front bar virtually needs to be fully removed too? So a second link to that would be needed?
Also, can the lower resonator mod be performed with the bumper removed? (as opposed to jack the car up, removing those inner panels, one front wheel, etc)
If you can do this, get a Mod to delete this post afterwards.

[TreeAdeyMan]

I reckon that removing the front bar just to do the lower resonator mod wouldn't be worth the time & hassle, it is much easier & quicker just to remove the plastic tray/cover under the bar. Removing this tray gives you all the access you could ever need to remove the resonator.

KJ.